본문
제품 정보
| Product | AR30 CA Remover |
|---|---|
| Code | SLL-AR-30 |
| Volume | 40ml |
| Products Summary | It can used as a detergent to wipe off instant adhesives or foreign sudstances on the surface. |
Product description
| - It can be used as a detergent to wipe off instant adhesives or foreign
substances on the surface. It can be used to remove the adhesive from the incorrectly bonded area. |
 |
Type : AR30 40ml |
Feature
| Applied material | Metal, wood, rubber, plastic, stone, etc. |
| Properties | Liquid |
| Specific Gravity | 1.0 |
| Viscosity | 1cps |
| Flash Point | -17 |
| Drying time(sec) | 60 |
| effect duration(min) | 60분 |
- Products for removing instant adhesives, rubber
solvents, adhesives, etc.
- Apply it to the area where the adhesive or adhesive is incorrectly applied
or the area to be removed.
- Cyanoacrylate adhesives can be removed safely and quickly. It is also easy
to remove resin-based or rubber-based adhesives.
Packing Unit
- 40ml : 10ea / boxHow to use AR30
Bond terms
- Working time : It is the time that a mixture is able to coat after two liquid stirring a mixture.
(Usually the initial viscosity will be double times or nearly 60% of peak heating time.)
- Setting time : It is the time that bond strength and physical properties(tensile, compression, hardness, etc.) are almost stable.
- Tensile strength : It is result of maximum load divided by the area, when the applied adhesive things then test for tensile strength.
- Thixotropy : It is gel in the stationary status. Only it turns to liquidity as application of agitation or vibration. After leaving it, it turn back to the gel status.